If a screen protector is going to cause you trouble, this is almost certainly where. The under-display fingerprint reader has to read through the glass you just applied, and not every sensor tolerates that equally.
Optical sensors. The most common. They illuminate your finger using the display itself and photograph the reflection. Because they work with light, they tolerate an extra transparent layer reasonably well. What bothers them is anything that dims or scatters that light: a heavily tinted, matte or privacy protector can drop the recognition rate.
Ultrasonic sensors. Found mainly in higher-end Samsung Galaxy handsets. Instead of light they emit an ultrasonic pulse that travels through the glass, reflects off the ridges of your finger and returns. That is more secure, because it reads three-dimensional shape rather than a flat image, but it is far fussier about whatever sits on top.
The reason is physical: sound needs a continuous medium. Any air gap between the protector and the display scatters the pulse and the sensor stops recognising anything at all. That is why the problems cluster almost entirely on ultrasonic phones.
Edge-only adhesive. Cheap protectors glue around the perimeter only and leave air in the middle — directly over the sensor. On an optical sensor that shows as a visible halo; on an ultrasonic one the reader simply stops working. Always look for full adhesive.
Too much thickness. An ultrasonic pulse attenuates as it passes through material. Above roughly 0.4 mm, reading starts to degrade. If your phone is ultrasonic, thin glass beats "reinforced" glass.
Finishes that interfere. Matte, privacy and blue-light filters add layers or texture between finger and sensor. They attract the most complaints in this category, and on an ultrasonic phone they are best avoided unless the manufacturer states compatibility explicitly.
Prices change daily, so the price and availability that count are always the ones shown on Amazon once you follow the link.
Protecting a Galaxy Z Fold, Z Flip or Pixel Fold in the UK: why the inner display cannot take tempered glass, what to do…
Read the guide →Lens protectors prevent scratches on the camera module but add another surface between the scene and the sensor. When it…
Read the guide →A matte protector cuts reflections and fingerprints and improves finger glide, at the cost of some sharpness and a sligh…
Read the guide →What the Consumer Rights Act 2015 gives you on a faulty screen protector, how the 30-day right to reject differs from th…
Read the guide →Protecting an Apple Watch, Galaxy Watch or sports watch in the UK: flat versus domed glass, bumper cases, and why on som…
Read the guide →Nearly every listing claims 9H hardness. Where the number comes from, why it is not the Mohs scale, and which specificat…
Read the guide →Modern cover glass survives far more than it did a decade ago, but the physics has not changed. When a protector earns i…
Read the guide →Check the manufacturer's specifications. As a rough rule, ultrasonic has been used mainly in higher-end Samsung Galaxy models, while optical sensors appear in most other phones with a reader under the display.
First delete the stored prints and enrol them again with the protector already fitted — the sensor had memorised the reading through bare glass. If it still fails, check no bubble sits over the sensor and that the protector uses full adhesive.
With an optical sensor it usually works, with slightly lower reliability. With an ultrasonic sensor this is where most problems arise, so we would avoid it unless the manufacturer states compatibility with your specific model.
On ultrasonic sensors, yes: the pulse attenuates passing through material, and above roughly 0.4 mm reading degrades. On those phones a thin quality glass performs better than a thick "reinforced" one.